dmesg - Intel Pentium 4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ff2ffff] usable
BIOS-e820: [mem 0x000000007ff30000-0x000000007ff3ffff] ACPI data
BIOS-e820: [mem 0x000000007ff40000-0x000000007ffeffff] ACPI NVS
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P4C800-E, BIOS 1021.007 03/16/2005
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7ff30 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
initial memory mapped: [mem 0x00000000-0x01bfffff]
Base memory trampoline at [c009a000] 9a000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37600000-0x377fffff]
[mem 0x37600000-0x377fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x375fffff]
[mem 0x34000000-0x375fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37800000-0x379fdfff]
[mem 0x37800000-0x379fdfff] page 4k
BRK [0x016aa000, 0x016aafff] PGTABLE
BRK [0x016ab000, 0x016acfff] PGTABLE
RAMDISK: [mem 0x367a8000-0x373cbfff]
ACPI: RSDP 000f9d90 00014 (v00 ACPIAM)
ACPI: RSDT 7ff30000 00030 (v01 A M I OEMRSDT 03000516 MSFT 00000097)
ACPI: FACP 7ff30200 00081 (v02 A M I OEMFACP 03000516 MSFT 00000097)
ACPI: DSDT 7ff303f0 03797 (v01 P4CED P4CED106 00000106 INTL 02002026)
ACPI: FACS 7ff40000 00040
ACPI: APIC 7ff30390 0005C (v01 A M I OEMAPIC 03000516 MSFT 00000097)
ACPI: OEMB 7ff40040 0003F (v01 A M I OEMBIOS 03000516 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
1157MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
BRK [0x016ad000, 0x016adfff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x379fdfff]
HighMem [mem 0x379fe000-0x7ff2ffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7ff2ffff]
On node 0 totalpages: 523982
free_area_init_node: node 0, pgdat c157b680, node_mem_map f57a8020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 223742 pages, LIFO batch:31
HighMem zone: 2315 pages used for memmap
HighMem zone: 296242 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
e820: [mem 0x80000000-0xffb7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f79d6000 s35776 r0 d21568 u57344
pcpu-alloc: s35776 r0 d21568 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522202
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:0007ff30)
Memory: 2059244K/2095928K available (4039K kernel code, 360K rwdata, 1244K rodata, 516K init, 572K bss, 36684K reserved, 1184968K highmem)
virtual kernel memory layout:
fixmap : 0xffd35000 - 0xfffff000 (2856 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc1586000 - 0xc1607000 ( 516 kB)
.data : 0xc13f1fb4 - 0xc1585300 (1612 kB)
.text : 0xc1000000 - 0xc13f1fb4 (4039 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f7408000 soft=f740a000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2798.543 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5597.08 BogoMIPS (lpj=11194172)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (c1607000 - c160c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz (fam: 0f, model: 02, stepping: 09)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f74b4000 soft=f74b6000
smpboot: Booting Node 0, Processors #1 OK
Initializing CPU#1
Brought up 2 CPUs
smpboot: Total of 2 processors activated (11194.70 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7ff40000-0x7ffeffff] (720896 bytes)
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffefffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:2578] type 00 class 0x060000
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
pci 0000:00:01.0: [8086:2579] type 01 class 0x060400
pci 0000:00:03.0: [8086:257b] type 01 class 0x060400
pci 0000:00:06.0: [8086:257e] type 00 class 0x088000
pci 0000:00:06.0: reg 0x10: [mem 0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xeec0-0xeedf]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xef00-0xef1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xef20-0xef3f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xef40-0xef5f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfebff800-0xfebffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0xfc00-0xfc0f]
pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xefe0-0xefe7]
pci 0000:00:1f.2: reg 0x14: [io 0xefac-0xefaf]
pci 0000:00:1f.2: reg 0x18: [io 0xefa0-0xefa7]
pci 0000:00:1f.2: reg 0x1c: [io 0xefa8-0xefab]
pci 0000:00:1f.2: reg 0x20: [io 0xef90-0xef9f]
pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1f.5: [8086:24d5] type 00 class 0x040100
pci 0000:00:1f.5: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:00:1f.5: reg 0x14: [io 0xee80-0xeebf]
pci 0000:00:1f.5: reg 0x18: [mem 0xfebffc00-0xfebffdff]
pci 0000:00:1f.5: reg 0x1c: [mem 0xfebff400-0xfebff4ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:4e48] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0xb000-0xb0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfe8f0000-0xfe8fffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:4e68] type 00 class 0x038000
pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0xfe8e0000-0xfe8effff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xf7efffff pref]
pci 0000:02:01.0: [8086:1019] type 00 class 0x020000
pci 0000:02:01.0: reg 0x10: [mem 0xfe9e0000-0xfe9fffff]
pci 0000:02:01.0: reg 0x18: [io 0xcf80-0xcf9f]
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:04.0: [105a:3373] type 00 class 0x010400
pci 0000:03:04.0: reg 0x10: [io 0xdf00-0xdf3f]
pci 0000:03:04.0: reg 0x14: [io 0xdfa0-0xdfaf]
pci 0000:03:04.0: reg 0x18: [io 0xdc00-0xdc7f]
pci 0000:03:04.0: reg 0x1c: [mem 0xfeaff000-0xfeafffff]
pci 0000:03:04.0: reg 0x20: [mem 0xfeac0000-0xfeadffff]
pci 0000:03:04.0: supports D1
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ff30000-0x7fffffff]
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x0290-0x0297] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x0800-0x087f] has been reserved
system 00:09: [io 0x0480-0x04bf] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0x7ffeffff] could not be reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xf7efffff pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xf7efffff pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS mismatch (16 != 580), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 12432K (f67a8000 - f73cc000)
audit: initializing netlink socket (disabled)
type=2000 audit(1388663314.568:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1731
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel i875 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2014-01-02 11:48:35 UTC (1388663315)
Freeing unused kernel memory: 516K (c1586000 - c1607000)
Write protecting the kernel text: 4040k
Write protecting the kernel read-only data: 1252k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
systemd-udevd[56]: starting version 204
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfebff800
ACPI: bus type ATA registered
libata version 3.00 loaded.
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11-2-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11-2-686-pae uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata_piix 0000:00:1f.2: MAP [
P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:02:01.0: setting latency timer to 64
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xefe0 ctl 0xefac bmdma 0xef90 irq 18
ata4: SATA max UDMA/133 cmd 0xefa0 ctl 0xefa8 bmdma 0xef98 irq 18
sata_promise 0000:03:04.0: version 2.12
scsi4 : sata_promise
scsi5 : sata_promise
scsi6 : sata_promise
ata5: SATA max UDMA/133 mmio m4096@0xfeaff000 ata 0xfeaff200 irq 23
ata6: SATA max UDMA/133 mmio m4096@0xfeaff000 ata 0xfeaff280 irq 23
ata7: PATA max UDMA/133 mmio m4096@0xfeaff000 ata 0xfeaff300 irq 23
ata2.00: ATAPI: Memorex 24MAXX 1040, 5WS2, max UDMA/33
ata2.01: ATAPI: PLEXTOR DVDR PX-712A, 1.06, max UDMA/33
ata2.00: configured for UDMA/33
ata3.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: ATA-6: WDC WD360GD-00FNA0, 35.06K35, max UDMA/133
ata4.00: 72303840 sectors, multi 16: LBA48
ata4.00: applying bridge limits
ata2.01: configured for UDMA/33
ata3.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM Memorex 24MAXX 1040 5WS2 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-712A 1.06 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/100
scsi 3:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Attached scsi generic sg0 type 5
scsi 1:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
e1000 0000:02:01.0 eth0: (PCI:33MHz:32-bit) 00:0e:a6:cd:c1:24
e1000 0000:02:01.0 eth0: Intel(R) PRO/1000 Network Connection
tsc: Refined TSC clocksource calibration: 2798.653 MHz
usb 2-1: new low-speed USB device number 2 using uhci_hcd
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133
ata5.00: 78165360 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 2-1: New USB device found, idVendor=046d, idProduct=c01b
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB-PS/2 Optical Mouse
usb 2-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
hid-generic 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-6: WDC WD360GD-00FNA0, 35.06K35, max UDMA/133
ata6.00: 72303840 sectors, multi 0: LBA48
ata6.00: applying bridge limits
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access ATA WDC WD360GD-00FN 35.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
sd 5:0:0:0: Attached scsi generic sg5 type 0
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
sr0: scsi3-mmc drive: 61x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
Switched to clocksource tsc
EXT4-fs (sdc2): mounted filesystem without journal. Opts: (null)
systemd-udevd[337]: starting version 204
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (R350 0x1002:0x4E48 0x1002:0x0002).
[drm] register mmio base: 0xFE8F0000
[drm] register mmio size: 65536
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF
[drm] Generation 1 PCI interface in multifunction mode
[drm] Limiting VRAM to one aperture
radeon 0000:01:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)
intel_rng: FWH not detected
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 443622 kiB
[TTM] Zone highmem: Available graphics memory: 1036106 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
[drm] radeon: 2 quad pipes, 1 Z pipes initialized.
radeon 0000:01:00.0: WB disabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0xf8216000
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R300 Microcode
radeon 0000:01:00.0: firmware: agent loaded radeon/R300_cp.bin into memory
[drm] radeon: ring at 0x00000000F8001000
[drm] ring test succeeded in 0 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP1: INTERNAL_TMDS1
[drm] Connector 2:
[drm] SVIDEO-1
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
input: PC Speaker as /devices/platform/pcspkr/input/input4
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[drm] fb mappable at 0xE8040000
[drm] vram apper at 0xE8000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
platform microcode: firmware: agent loaded intel-ucode/0f-02-09 into memory
microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e
platform microcode: firmware: agent loaded intel-ucode/0f-02-09 into memory
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
snd_intel8x0 0000:00:1f.5: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel8x0: white list rate for 1043:80f3 is 48000
EXT4-fs (sdc2): re-mounted. Opts: (null)
EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro,discard
fuse init (API version 7.22)
loop: module loaded
w83627hf: w83627hf: Found W83627THF chip at 0x290
w83627hf w83627hf.656: Reading VID from GPIO5
NTFS driver 2.1.30 [Flags: R/W MODULE].
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
perf samples too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf samples too long (5065 > 5000), lowering kernel.perf_event_max_sample_rate to 25000